Energy Efficient Industrial Screw Compressor With Direct Drive Silent​

New generation of highly efficient imported host machine

• Advanced 8d Energy saved spiral tooth-type technology
• New-type 5:6 asymmetrical rotator tooth type
• Drawing uses leitz high-precision CMM measuring machine
• Adopt top-level quality SKF taper-roller bearing imported with original packaging from Sweden
• Relative power increases by more than 5%-10% in gas discharge when compared with that of ordinary machine model

Highly efficient magnetic steel of permanent magnetic motor

Punching uses high-performance low-loss silicon, we conduct simulation analysis of mechanical strength with finite element method so as to make rotator inertia reach the minimum on the condition that enough mechanical rigidity and mechanical strength.

Rotator magnetic steel adopts high-performance NdFeB permanent magnetic material to form sine wave air-gap field.

Axial flow uses the processing method of embedded bond, which simultaneously meets requirements of optical axis and bond axis.

Reduce energy costs

• When the energy accounts for above 70% of the life cycle cost (LCC) of compressor, the energy consumption optimization becomes essential. In fact, the power consumption for the production of compressed air accounts for over 40% of the total power consumption of the plant, so the energy consumption optimization can even determine its success. Using the permanent-magnetism frequency-conversion technology of Dresdnerlan, we can provide partners for your cost saving. WZS series of products can truly reflect the demand for compressed air, making substantial energy saving become a reality
• Traditional compressors are operated between two set pressure points using the control methods of "full load and no load". The compressor turns into no load mode when the pressure reaches the maximum. When the air demand is medium or low, the no-load power will be consumed excessively, which will result in large amount of waste.
• Because no unnecessary power consumption will be generated, the energy cost reduced by the permanent-magnetism frequency-conversion can be up to 35% or more. The life cycle cost (LCC) of the compressor can be reduced by an average of 22%. In a word, compared with the compressor with invariable rotate speed, Wan Beardsley compressor can recover the extra cost within 1 or 2 years.

Steady Pressure

It tracks system gas volume changes automatically, and adjusts the revolving speed of compressor accurately with the use of PID (proportional, differential, integral), to keep the system pressure stable.

Start without stamping

• The variable frequency starting method reduces the impact of the start of the compressor on the power grid and mechanical parts greatly, thus extending the life of the machine.
• Eliminate invalid transitional period from full-load power to no-load power
• Avoid excessive no-load power consumption
• Maintain the net pressure section
• Reduce the overall average operating pressure
• System pressure is low, making the system leak declined to a minimum
• It accelerates with the use of soft-start motor gradually, to improve flexibility, thus avoiding the surge

Similarly, for two models with above rated power 37kw, when load rate is only 605, input power of power-frequency model under ordinary air inflow throttling control is 39.2kw_; while shaft power of permanent magnetic power-frequency motor is 23.6kw with electricity saving ratio being 37.5%. If we calculate according to 40,000 operating hours per year, annual electric charge of ordinary asynchronous power-frequency model is RMB 107,200, however, annual electric charge of permanent magnetic synchronous servo model is RMB 65,800, saving RMB 41,400 in each year.

Industrial Screw Compressor Parameters

Company profile:

Wan Beardsley Compression Machine (Shanghai) Co., Ltd is a medium and large-sized enterprise specialized in research, development and production of air compressors. By virtue of fruitful technological strength and advanced and complete production and testing equipments, this company pursues enterprise tenet “Achieve high quality with conscientiousness and create a centennial brand with quality”, strictly performs the commitment “be the most energy-efficient screw air compressor”, continuously seeks for sustainable improvement of products, process and system, and increasingly improves product properties, quality and reliability so as to make out R & D and manufacturing capacity step onto a new stair in manufacturing technology of air compressor. Our product quality has reached internally first-class level, and some products have been exported to and supported Southeast Asia and European and American markets.

FAQ:
1. Before quoting, what should users offer?
1). Discharge pressure (Bar, Mpa or Psi)
2). Air discharge/Air flow/Air capacity (m3/min or CFM)
3). Power supply (220/380V, 50/60Hz, 3Phase)
2. If I don't know the pressure and air flow, what should I do?
1). Take the picture of nameplate, we will advise the suitable air compressor to you.
2).T ell us what industry you are, we can advise the suitable one (so as to air tank / air dryer / air filters).

    Wan Beardsley Compression Machine (Shanghai) Co., Ltd is a medium and large-sized enterprise specialized in research, development and production of air compressors. By virtue of fruitful technological strength and advanced and complete production and testing equipments, this company pursues enterprise tenet “Achieve high quality with conscientiousness and create a centennial brand with quality”, strictly performs the commitment “be the most energy-efficient screw air compressor”, continuously seeks for sustainable improvement of products, process and system, and increasingly improves product properties, quality and reliability so as to make out R & D and manufacturing capacity step onto a new stair in manufacturing technology of air compressor. Our product quality has reached internally first-class level, and some products have been exported to and supported Southeast Asia and European and American markets.